Show Power Detail - Dell C9000 Series Reference Manual

Field
Device Type
PoE Port Priority
LLDP Support
Example
Dell#show power inline pe 255 stack-unit 0
Global inline power Threshold :
Power Reserved for inline Power:
Total Inline Power Consumed:
Remaining inline power Available:
Power Management Mode:
Interface
PoE Port
Priority
-------------
--------
PeGi 255/0/0
low

show power detail

Display the inline power consumption details for a port extender.
C9000 Series
Syntax
show power detail {pe pe-id stack-unit unit number}
Parameters
pe
stack-unit
Defaults None
Command Modes EXEC
Command History
This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Description
Displays whether the device is Type 1 or Type 2.
Displays the power configured for the port (default is low). See
power inline priority.
Displays the power requested is via LLDP-MED extended power-
via-mdi TLV or IEEE 802.3at power-via-mdi TLV.
Inline Power
LLDP
Max / Alloc
Support
(Watts)
------------
------
30.00/21.40
0
Enter the keywordpe and the port externder ID. Range is 0–255.
Enter the stack-unit keyword and the unit ID. Range is 0–7.
99
1612W
21W
1580W
Class
Inline Power Class
Consumed
(Watts)
------------ -------
21.50
Port Extenders (PE)
Device
Type
------
4 2
1760