Distribute-List Out - Dell C9000 Series Reference Manual

Command History
This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.9(0.0)
9.5(0.1)
9.0.2.0
8.3.19.0
8.3.12.0
7.5.1.0
6.3.1.0
Related
Commands

distribute-list out

Suppress network prefixes from being advertised in outbound updates.
C9000 Series
Syntax
distribute-list prefix-list-name out [connected | bgp as number |
ospf process-id | rip | static]
To return to the default values, use the no distribute-list prefix-list-name
out [bgp as number connected | ospf process-id | rip | static]
command.
Parameters
prefix-list-name
connected
ospf process-id
• CONFIGURATION-ROUTER-ISIS-ADDRESS-FAMILY-IPV6 (for IPv6)
Description
Introduced on the C9010.
Introduced on the Z9500.
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the S4810.
Added IPv6 ISIS support.
Introduced.
• distribute-list out — suppresses networks from being advertised in updates.
• redistribute — redistributes routes from one routing domain to another routing
domain.
Specify the prefix list to filter prefixes in routing updates.
(OPTIONAL) Enter the keyword connected for directly
connected routing process.
(OPTIONAL) Enter the keyword ospf then the OSPF process-ID
number. The range is from 1 to 65535.
Intermediate System to Intermediate System (IS-IS) 1060