Ip Name-Server - Dell C9000 Series Reference Manual

Networking command-line reference guide
Hide thumbs Also See for C9000 Series:
Table of Contents

Advertisement

Layer 2
Overhead
Tagged Packet
with VLAN-Stack
Header
Related
mtu
Commands

ip name-server

Enter up to six IPv4 addresses of name servers. The order you enter the addresses determines the order of
their use.
C9000 Series
Syntax
ip name-server ipv4-address [ipv4-address2...ipv4-address6]
To remove a name server, use the no ip name-server ip-address command.
Parameters
ipv4-address
ipv4-address2...
ipv4-address6
Defaults
No name servers are configured.
Command Modes
CONFIGURATION
Command History
This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.9(0.0)
9.2(1.0)
8.3.19.0
8.3.11.1
8.3.7.0
Difference between Link MTU and IP MTU
26 bytes
— sets the link MTU for an Ethernet interface.
Enter the IPv4 address, in dotted decimal format, of the name
server to be used.
(OPTIONAL) Enter up five more IPv4 addresses, in dotted
decimal format, of name servers to be used. Separate the
addresses with a space.
Description
Introduced on the C9010.
Introduced on the Z9500.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
IPv4 Routing
1197

Advertisement

Table of Contents
loading

Table of Contents