Show Track Ipv6 Route - Dell C9000 Series Reference Manual

show track ipv6 route

Display information about all tracked IPv6 routes, including configuration, current tracked state (UP or
DOWN), and the clients which are tracking an object.
C9000 Series
Syntax
show track ipv6 route [brief]
Parameters
brief
Command Modes
Command History
This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.9(0.0)
9.8(0.0)
9.7(0.0)
8.3.12.0
8.4.1.0
Usage Command The following table describes the show track ipv6 route command shown in the
following example.
Output
Track object-id
Interface type
slot/port, IP route
ip-address, IPv6
route ipv6-
address
object is Up/
Down
(OPTIONAL) Display a single line summary of information for
tracked IPv6 routes.
• EXEC
• EXEC Privilege
Description
Introduced on the C9010.
Introduced on the S3048-ON and S4048-ON.
Introduced on the S6000-ON.
Introduced on the S4810.
Introduced.
Description
Displays the number of the tracked object.
Displays the interface type and slot/port number or address of
the IPv4/IPv6 route that is being tracked.
Up/Down state of tracked object; for example, IPv4 interface,
reachability, or metric threshold of an IP route.
Object Tracking 1473