Dell C9000 Series Reference Manual page 1398

snooping [vlan
vlan-id] [group-
address [source-
address]]
summary
vlt
Command Modes
•
•
Command History
This guide is platform-specific. For command information about other platforms, see
the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.9(0.)
9.0.2.0
9.2.(0.0)
8.4.1.1
8.3.19.0
8.3.7.0
7.6.1.0
7.5.1.0
Enter the keyword snooping to display information on the
multicast routes PIM-SM snooping discovers.
Enter a VLAN ID to limit the information displayed to the
multicast routes PIM-SM snooping discovers on a specified
VLAN. The VLAN ID range is from 1 to 4094.
Enter a multicast group address and, optionally, a source
multicast address in dotted decimal format (A.B.C.D) to limit the
information displayed to the multicast routes PIM-SM snooping
discovers for a specified multicast group and source.
(OPTIONAL) Enter the keyword summary to view a summary of
all routes.
(OPTIONAL) Enter the keyword vlt to view multicast routes
with a spanned incoming interface. Enter a multicast group
address in dotted decimal format (A.B.C.D) to limit the
information displayed to the multicast routes for a specified
multicast group and optionally a source multicast address in
dotted decimal format (A.B.C.D) to limit the information
displayed for a specified multicast source. Enter the keyword
count to display the total number of multicast routes with the
spanned IIF.
EXEC
EXEC Privilege
Description
Introduced on the C9010.
Introduced on the S6000.
Added support for keyword vlt to the Z9000, S4810, and
S4820T.
Support for the keyword snooping and the optional vlan
vlan-id, group-address, and source-address parameters
were added on E-Series ExaScale.
Introduced on the S4820T.
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the C-Series.
Multicast 1398