Ip Pim Graceful-Restart - Dell C9000 Series Reference Manual

The following is a list of the Dell Networking OS version history for this command.
Version
9.10(0.0)
9.9(0.0)
9.8(0.0)
9.7(0.0)
9.5(0.0)
9.0.2.0
8.3.19.0
8.3.11.1
8.3.7.0
8.1.1.0
7.8.1.0
Usage Information The router with the largest value assigned to an interface becomes the designated
router. If two interfaces contain the same designated router priority value, the interface
with the largest interface IP address becomes the designated router.

ip pim graceful-restart

This feature permits configuration of non-stop forwarding (NSF or graceful restart) capability of a PIM router
to its neighbors.
Syntax
ip pim graceful-restart {nsf [restart-time | stale-entry-time]}
Parameters
nsf
restart-time
stale-entry-time
Defaults as above
Command Modes CONFIGURATION
Command History
This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide.
Description
Introduced the Configuration Terminal Batch mode on C9010.
Introduced on the C9010.
Introduced on the S3048-ON and S4048-ON.
Introduced on the S6000-ON.
Introduced on the Z9500.
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the E-Series ExaScale.
Introduced on the C-Series on port-channels and the S-Series.
Enter the keyword nsf to configure the non-stop forwarding
capability.
(OPTIONAL) Enter the keywords restart-time followed by the
number of seconds estimated for the PIM speaker to restart. The
range is 30 to 300 seconds. The default is 180 seconds.
(OPTIONAL) Enter the keywords stale-entry-time followed
by the number of seconds for which entries are kept alive after
restart. The range is 30 to 300 seconds. The default is 60
seconds.
PIM-Sparse Mode (PIM-SM) 1676