The Dell Networking OS supports the interface configuration commands described in this chapter.
This chapter contains the following sections:
•
Basic Interface Commands
•
EIS Commands
•
Port Channel Commands
•
High-Gigabit Port Channel Commands
Topics:
•
Basic Interface Commands
•
Egress Interface Selection (EIS) Commands
•
Port Channel Commands
•
HiGig Port Channel Commands
Basic Interface Commands
The following commands are for Physical, Loopback, and Null interfaces.
clear counters
Clear the counters used in the show interfaces commands for all virtual router redundancy protocol (VRRP)
groups, virtual local area networks (VLANs), and physical interfaces, or selected ones.
C9000 Series
Syntax
clear counters [interface] [vrrp [ipv6 {vrid} | learning-limit |
vlan vlan-id]
Parameters
interface
(OPTIONAL) Enter any of the following keywords and slot/port,
pe-id/stack-unit/port or number to clear counters from a
specified interface:
•
For IPv4 access-group counters, enter the keyword ip.
•
For IPv6 access-group counters, enter the keyword ipv6.
21
Interfaces
Interfaces
919