Ip Redirect-List - Dell C9000 Series Reference Manual

ip redirect-list

Configure a redirect list and enter REDIRECT-LIST mode.
C9000 Series
Syntax
ip redirect-list redirect-list-name ]
To remove a redirect list, use the no ip redirect-list command.
Parameters
redirect-list-name
Defaults None
Command Modes
CONFIGURATION
CONFIGURATION TERMINAL BATCH
Command History
This guide is platform-specific. For command information about other platforms, see
the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.10(0.0)
9.9(0.0)
9.8(0.0)
9.7(0.0)
9.5(0.1)
9.4(0.0)
8.4.2.1
8.4.2.0
7.7.1.0
Enter a description to identify the IP redirect list (16 characters
maximum)
Description
Introduced the Configuration Terminal Batch mode on C9010.
Introduced on the C9010.
Introduced on the S3048-ON and S4048–ON.
Introduced on the S6000-ON.
Introduced on the Z9500.
Introduced on the S4810, S4820T, S6000, and Z9000.
Introduced on the C-Series and S-Series.
Introduced on the E-Series TeraScale.
Introduced on the E-Series ExaScale.
Policy-based Routing (PBR) 1702