Show Ipv6 Mld_Host - Dell Force10 Z9000 Reference Manual

show ipv6 mld_host

Display the IPv6 MLD host counters.
S4810
Syntax show ipv6 mld_host
Command Modes EXEC
Command History
Version 8.3.12.0
Usage The following describes the show ipv6 mld-host command shown in the Example
Information
below:
Field
Valid MLD Packets
Reports
Leaves
MLDv1 queries
MLDv2 queries
Malformed Packets
Example
MLD Host Traffic Counters
Elapsed time since counters cleared: 0028:33:52
Valid MLD Packets
Reports
Leaves
MLDv2 Queries
MLDv1 Queries
Errors:
Malformed Packets: 4510
Introduced on the S4810.
Description
The total number of packets received and sent from the last time the
elapsed time was cleared.
The total number of reports (queries and unsolicited reports
generated from joins or leaves) that have been received or sent.
The number of Multicast leaves that have been sent.
The number of MLDv1 queries that have been received.
The number of MLDv2 queries that have been received.
The number of MLDv1 and MLDv2 packets that do not match the
requirement for a valid MLD packet.
Received Sent
97962 18036
79962 18034
---- 0
18000 ----
0 ----
853