Version
9.0.2.0
8.3.19.0
8.3.11.1
8.3.7.0
8.2.1.0
default-router
Assign a default gateway to clients based on the address pool.
C9000 Series
Syntax
default-router address [address2...address8]
Parameters
address
Defaults
none
Command Modes
DHCP <POOL>
Command History
This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.9(0.0)
9.2(1.0)
8.3.19.0
8.3.11.1
8.3.7.0
8.2.1.0
Description
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the C-Series and S-Series.
Enter a list of routers that may be the default gateway for clients
on the subnet. You may specify up to eight routers. List them in
order of preference.
Description
Introduced on the C9010.
Introduced on the Z9500.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the C-Series and S-Series.
Dynamic Host Configuration Protocol (DHCP)
806