Dell C9000 Series Reference Manual page 803

Parameters
interface typeslot/
port
Defaults none
Command Modes EXEC Privilege
Command History
Version
9.9(0.0)
9.2(1.0)
8.3.19.0
8.3.11.1
8.3.7.0
8.2.1.0
Example
Dell# debug ip dhcp client events
Dell(conf-if-fo-2/0)#do show debugging
Dhcp Client :
DhcpClient Event debugging is on for fortyGigE 2/0
Dell(conf-if-fo-2/0)#ip address dhcp
Dell(conf-if-fo-2/0)#no ip address dhcp
Dell(conf-if-fo-2/0)#do show logging
Syslog logging: enabled
(40960 bytes)
Jan 7 01:38:42: %SYSTEM:CP %DHCLIENT-5-DHCLIENT-LOG:
DHCLIENT_DBG_EVT: Interface Fo 2/0 :DHCP DISABLED CMD sent to
FTOS in state START
Jan 7 01:38:41: %SYSTEM:CP %DHCLIENT-5-DHCLIENT-LOG:
DHCLIENT_DBG_EVT: Interface Fo 2/0 :Transitioned to state START
Jan 7 01:38:41: %SYSTEM:CP %DHCLIENT-5-DHCLIENT-LOG:
DHCLIENT_DBG_EVT: Interface Fo 2/0 :DHCP DISABLE CMD Received in
state BOUND
Jan 7 01:38:07: %SYSTEM:CP %DHCLIENT-5-DHCLIENT-LOG:
Enter the keyword interface with the interface type and slot/
port information to display DHCP event messages for a specified
interface. The valid interface types are:
• For a 10-Gigabit Ethernet interface, enter the keyword
tengigabitethernet.
• For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE.
Description
Introduced on the C9010.
Introduced on the Z9500.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the C-Series and S-Series.
Console logging: level debugging
Monitor logging: level debugging
Buffer logging: level debugging, 9 Messages Logged, Size
Trap logging: level informational
Logging to 10.10.10.4
Logging to 10.1.2.4
Logging to 172.31.1.4
Logging to 133.33.33.4
Logging to 172.16.1.162
Last logging buffer cleared: Jan 7 01:38:04
Dynamic Host Configuration Protocol (DHCP) 803