Show Ipv6 Mld_Host - Dell Z9500 Command Reference Manual

Dell# show ipv6 interface linecard 1 configured | grep ff02

show ipv6 mld_host

Display the IPv6 MLD host counters.
Z9500
Syntax
show ipv6 mld_host
Command EXEC
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Neworking OS version history for this command.
Version
9.2(1.0)
8.3.19.0
8.3.11.1
8.3.7.0
Usage The following describes the show ipv6 mld-host command shown in the
Information following example.
Field
Valid MLD Packets
IPv6 Basics
ND reachable time is 27000 milliseconds
ND base reachable time is 30000 milliseconds
ND advertised reachable time is 0 milliseconds
ND advertised retransmit interval is 0 milliseconds
ND router advertisements are sent every 200 to 600 seconds
ND router advertisements live for 1800 seconds
ND advertised hop limit is 64
IPv6 hop limit for originated packets is 64
ff02::1
ff02::2
ff02::1:ff00:6
ff02::1:ffff:6f08
ff02::1
ff02::2
ff02::1:ff00:4
ff02::1:ffff:6f08
Description
Introduced on the Z9500.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Description
The total number of packets received and sent from the last
time the elapsed time was cleared.
1039