Debug Ip Dhcp Client Packets - Dell C9000 Series Reference Manual

DHCLIENT_DBG_EVT: Interface Fo 2/0 :DHCP ENABLE CMD Received in
state START
Message
BOOTREPLY
DHCPOFFER
DHCPACK
DHCPNAK

debug ip dhcp client packets

Activate the debugging and display of log messages for DHCP packets sent and received on DHCP client
interfaces.
C9000 Series
Syntax
debug ip dhcp client packets [interface type slot/port]
Parameters
interface typeslot/
port
Defaults none
Command Modes EXEC Privilege
Command History
Version
9.9(0.0)
9.2(1.0)
8.3.19.0
8.3.11.1
8.3.7.0
8.2.1.0
Example
Dell# debug ip dhcp client packets
Dell(conf)#do show debugging
Dhcp Client :
DhcpClient Packet debugging is on for fortyGigE 2/0
Dell(conf-if-fo-2/0)#ip address dhcp
Dell(conf-if-fo-2/0)#no ip address dhcp
Sent
0
10
16
0
Enter the keyword interface with the interface type and slot/
port information to display DHCP log messages for a specified
interface. The valid interface types are:
• For a 10-Gigabit Ethernet interface, enter the keyword
tengigabitethernet.
• For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE.
Description
Introduced on the C9010.
Introduced on the Z9500.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the C-Series and S-Series.
Dynamic Host Configuration Protocol (DHCP) 804