Ftp-Server Enable - Dell S4810 Reference Manual

ftp-server enable

Enable FTP server functions on the system.
S4810
Syntax
ftp-server [vrf vrf-name] enable
Parameters
vrf vrf-name
Defaults Disabled
Command CONFIGURATION
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.4.
(0.0)
Version 9.0.2.0
Version
8.3.19.0
Version
8.3.12.0
Version 8.3.11.1
Version 8.1.1.0
Version 7.6.1.0
Version 7.5.1.0
E-Series
Example
morpheus% ftp 10.31.1.111
Connected to 10.31.1.111.
220 Dell (1.0) FTP server ready
Name (10.31.1.111:dch): dch
331 Password required
Password:
230 User logged in
ftp> pwd
257 Current directory is "flash:"
ftp> dir
200 Port set okay
150 Opening ASCII mode data connection
Control and Monitoring
Enter the keyword vrf and then the name of the VRF to
enable the FTP server to listen to that VRF instance.
NOTE: Use this attribute to specify the VRF that is used
by the FTP server to accept client connections. If no VRF
is specified, then the default VRF is used.
Added support for VRF.
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the S4810.
Introduced on the Z9000.
Introduced on the E-Series ExaScale.
Introduced on the S-Series.
Introduced on the C-Series.
Original command.
105