Advertise Med Location-Identification - Dell Z9500 Reference Manual

Version
7.7.1.0
7.6.1.0
Related
debug lldp interface
Commands
show lldp neighbors
show running-config lldp

advertise med location-identification

To advertise a location identifier, configure the system.
Z9500
Syntax
advertise med location-identification {coordinate-based value |
civic-based value | ecs-elin value}
To return to the default, use the no advertise med location-
identification {coordinate-based value | civic-based value |
ecs-elin value} command.
Parameters
coordinate-
based value
civic-based
value
ecs-elin value
Defaults unconfigured.
Command CONFIGURATION (conf-lldp)
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.2(1.0)
8.3.19.0
1158
Description
Introduced on the S-Series.
Introduced on the C-Series and E-Series.
— debugs LLDP.
— displays the LLDP neighbors.
— displays the LLDP running configuration.
Enter the keywords coordinate-based then the
coordinated based location in hexadecimal value of 16 bytes.
Enter the keywords civic-based then the civic based
location in hexadecimal format. The range is from 6 to 255
bytes.
Enter the keywords ecs-elin then the Emergency Call
Service (ecs) Emergency Location Identification Number
(elin) numeric location string. The range is from 10 to 25
characters.
Description
Introduced on the Z9500.
Introduced on the S4820T.
Link Layer Discovery Protocol (LLDP)