Ip Dhcp Snooping Vlan - Dell S6100 Configuration Manual

ip dhcp snooping vlan

Enable DHCP Snooping on one or more VLANs.
Syntax [no] ip dhcp snooping vlan name
Parameters
name
Defaults Disabled.
Command Modes CONFIGURATION
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version
9.10(0.0)
9.8(1.0)
9.8(0.0P5)
9.8(0.0P2)
9.7(0.0)
9.2(1.0)
9.0.2.0
8.3.19.0
8.3.11.1
8.3.7.0
7.8.1.0
Usage Information When enabled, the system begins creating entries in the binding table for the specified VLANs.
Related Commands
•
show ip dhcp snooping
Display the contents of the DHCP binding table.
Syntax show ip dhcp snooping binding
Defaults none
Command Modes
•
•
1466 Security
Enter the name of a VLAN on which to enable DHCP Snooping.
Description
Introduced on the S6100-ON.
Introduced on the Z9100-ON.
Introduced on the S4048-ON.
Introduced on the S3048-ON.
Introduced on the S6000–ON.
Introduced on the Z9500.
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the C-Series and S-Series.
NOTE: Learning only happens if there is a trusted port in the VLAN.
ip dhcp snooping trust — configure an interface as trusted.
EXEC
EXEC Privilege