Tacacs+ Commands - Dell S6100 Configuration Manual

TACACS+ Commands

Dell Networking OS supports TACACS+ as an alternate method for login authentication.
tacacs-server group
Creates a group of TACACS servers to be used for Authentication, Authorization, and Accounting..
Syntax
aaa tacacsgroup group-name
To delete a group of TACACS servers, use the no tacacs-server group group-name command
.
Parameters
group-name
Defaults Not configured.
Command Modes CONFIGURATION
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version
9.10(0.0)
9.8(1.0)
9.8(0.0P5)
9.8(0.0P2)
9.7(0.0)
9.4.(0.0)
Usage Information If the TACACS group is not configured for Authentication, Authorization, and Accounting, then globally configured
TACACS servers are used for the purposes. When the TACACS group is removed, the AAA configuration is also
removed.
Example
Related Commands
•
•
debug tacacs+
To assist with troubleshooting, view TACACS+ transactions.
Syntax debug tacacs+
To disable debugging of TACACS+, use the no debug tacacs+ command.
1416 Security
Enter the name of the TACACS server group.
Description
Introduced on the S6100-ON.
Introduced on the Z9100-ON.
Introduced on the S4048-ON.
Introduced on the S3048-ON.
Introduced on the S6000–ON.
Introduced on the S-Series and Z-Series.
aaa authentication login — specifies the login authentication method.
tacacs-server key — configures a TACACS+ key for the TACACS server.