Advertise Med Location-Identification - Dell S6000 Reference Manual

Version
8.3.19.0
Version 8.3.11.1
Version 8.3.7.0
Version 7.7.1.0
Version 7.6.1.0
Related
debug lldp interface
Commands
show lldp neighbors

advertise med location-identification

To advertise a location identifier, configure the system.
S6000
Syntax
advertise med location-identification {coordinate-based value |
civic-based value | ecs-elin value}
To return to the default, use the no advertise med location-
identification {coordinate-based value | civic-based value |
ecs-elin value} command.
Parameters
coordinate-
based value
civic-based
value
ecs-elin value
Defaults unconfigured.
Command CONFIGURATION (conf-lldp)
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0
Link Layer Discovery Protocol (LLDP)
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the C-Series and E-Series.
— debugs LLDP.
— displays the LLDP neighbors.
Enter the keywords coordinate-based then the
coordinated based location in hexadecimal value of 16 bytes.
Enter the keywords civic-based then the civic based
location in hexadecimal format. The range is from 6 to 255
bytes.
Enter the keywords ecs-elin then the Emergency Call
Service (ecs) Emergency Location Identification Number
(elin) numeric location string. The range is from 10 to 25
characters.
Introduced on the S6000.
911