Dot1X Quiet-Period - Dell S6100 Configuration Manual

dot1x quiet-period

Set the number of seconds that the authenticator remains quiet after a failed authentication with a client.
Syntax dot1x quiet-period seconds
To disable quiet time, use the no dot1x quiet-time command.
Parameters
seconds
Defaults 30 seconds
Command Modes INTERFACE
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version
9.10(0.0)
9.8(1.0)
9.8(0.0P5)
9.8(0.0P2)
9.7(0.0)
9.2(1.0)
9.0.2.0
8.3.19.0
8.3.11.1
8.3.7.0
7.6.1.0
7.4.1.0
dot1x reauthentication
Enable periodic re-authentication of the client.
Syntax dot1x reauthentication [interval seconds]
To disable periodic re-authentication, use the no dot1x reauthentication command.
Parameters
interval seconds
Defaults 3600 seconds (1 hour)
1430 Security
Enter the number of seconds. The range is from 1 to 65535. The default is 30.
Description
Introduced on the S6100-ON.
Introduced on the Z9100-ON.
Introduced on the S4048-ON.
Introduced on the S3048-ON.
Introduced on the S6000–ON.
Introduced on the Z9500.
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the C-Series and S-Series.
Introduced on the E-Series.
(Optional) Enter the keyword interval then the interval time, in seconds, after which
re-authentication is initiated. The range is from 1 to 31536000 (1 year). The default is3600
(1 hour).