Dell S6100 Configuration Manual page 1463

vlan-id vlan-id
ip ip-address
interface type
slot/port
lease time
Defaults none
Command Modes
•
•
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version
9.10(0.0)
9.8(1.0)
9.8(0.0P5)
9.8(0.0P2)
9.7(0.0)
9.2(1.0)
9.0.2.0
8.3.19.0
8.3.11.1
8.5.1.0
8.3.7.0
7.8.1.0
Enter the keywords vlan-id then the VLAN to which the host belongs. The range is
from 2 to 4094.
Enter the keyword ip then the IP address that the server is leasing.
Enter the keyword interface then the type of interface to which the host is
connected.
• For a 10-Gigabit Ethernet interface, enter the keyword TenGigabitEthernet then
the stack/slot/port/subport information.
• For a 25-Gigabit Ethernet interface, enter the keyword twentyFiveGigE then the
stack/slot/port/subport information.
• For a 40-Gigabit Ethernet interface, enter the keyword fortyGigE then the stack/
slot/port[/subport] information.
• For a 50-Gigabit Ethernet interface, enter the keyword fiftyGigE then the stack/
slot/port/subport information.
• For a 100-Gigabit Ethernet interface, enter the keyword hundredGigE then the
stack/slot/port information.
• For a Loopback interface, enter the keyword loopback then a number from 0 to
16383.
Enter the slot and port number of the interface.
Enter the keyword lease then the amount of time the IP address is leased. The range is
from 1 to 4294967295.
EXEC
EXEC Privilege
Description
Introduced on the S6100-ON.
Introduced on the Z9100-ON.
Introduced on the S4048-ON.
Introduced on the S3048-ON.
Introduced on the S6000–ON.
Introduced on the Z9500.
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the Z9000.
Added support for 4-port 40G line cards.
Introduced on the S4810.
Introduced on the C-Series and S-Series.
Security 1463