Advertise Med Location-Identification - Dell Force10 Z9000 Reference Manual

Command Modes CONFIGURATION (conf-lldp)
Command History
Version 8.3.11.1
Version 8.3.7.0
Version 7.7.1.0
Version 7.6.1.0
Related
debug lldp interface
Commands
show lldp neighbors
show running-config lldp

advertise med location-identification

Configure the system to advertise a location identifier.
C-Series, E-Series, S-Series, Z-Series, S4810
Syntax advertise med location-identification {coordinate-based value |
civic-based value | ecs-elin value}
To return to the default, use the no advertise med location-identification
{coordinate-based value | civic-based value | ecs-elin value}
command.
Parameters
coordinate-based
value
civic-based
ecs-elin
Defaults unconfigured.
Command Modes CONFIGURATION (conf-lldp)
Command History
Version 8.3.11.1
Version 8.3.7.0
Version 7.7.1.0
Version 7.6.1.0
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the C-Series and E-Series.
– debugs LLDP.
– displays the LLDP neighbors.
– displays the LLDP running configuration.
Enter the keywords coordinate-based followed by the
coordinated based location in hexadecimal value of 16 bytes.
value
Enter the keywords civic-based followed by the civic based
location in hexadecimal format. The range is 6 to 255 bytes.
value
Enter the keywords ecs-elin followed by the Emergency Call
Service (ecs) Emergency Location Identification Number (elin)
numeric location string. The range is 10 to 25 characters.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the C-Series and E-Series.
969