addrole
deleterole
role-name
reset
command
Defaults
none
Command Modes
CONFIGURATION
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version
9.10(0.0)
9.8(1.0)
9.8(0.0P5)
9.8(0.0P2)
9.7(0.0)
9.5(0.0)
Related Commands
•
show role
Display information on permissions assigned to a command, including user role and/or permission level.
Syntax
show role mode {mode} {command}
Parameters
command
mode mode
line for LINE mode
route-map for Route-map mode
router for Router mode
Enter the keyword addrole to add permission to the command. You cannot add or
delete rights for the sysadmin role.
Enter the keyword deleterole to remove access to the command. You cannot add or
delete rights for the sysadmin role.
Enter a text string for the name of the user role up to 63 characters. These are 3 system
defined roles you can modify: secadmin, netadmin, and netoperator.
Enter the keyword reset to reset all roles back to default for that command.
Enter the command's keywords to assign the command to a certain access level. You can
enter one or more keywords.
Description
Introduced on the S6100-ON.
Introduced on the Z9100-ON.
Introduced on the S4048-ON.
Introduced on the S3048-ON.
Introduced on the S6000-ON.
Introduced on the Z9000, S6000, S4820T, S4810, and MXL.
userrole
— creates user roles.
Enter the command's keywords to assign the command to a certain access level. You can
enter one or all of the keywords.
Enter keyword then one of the following modes.
•
configure
•
exec
Security
1469