Tacacs-Server Host - Dell S6100 Configuration Manual

Version
9.8(0.0P5)
9.8(0.0P2)
9.7(0.0)
9.5(0.1)
9.4.(0.0)
Usage Information You can associate a TACACS server group with a VRF.
Example
Related Commands
•
•

tacacs-server host

Specify a TACACS+ host.
Syntax tacacs-server host {hostname | ipv4-address | ipv6-address} [port number]
[timeout seconds] [key key]
Parameters
hostname
ipv4-address | ipv6-
address
port number
timeout seconds
key key
Defaults Not configured.
Command Modes CONFIGURATION
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version
9.10(0.0)
9.8(1.0)
9.8(0.0P5)
9.8(0.0P2)
Description
Introduced on the S4048-ON.
Introduced on the S3048-ON.
Introduced on the S6000–ON.
Introduced on the Z9500.
Introduced on the S-Series and Z-Series.
aaa authentication login — specifies the login authentication method.
tacacs-server key — configures a TACACS+ key for the TACACS server.
Enter the name of the TACACS+ server host.
Enter the IPv4 address (A.B.C.D) or IPv6 address (X:X:X:X::X) of the TACACS+ server
host.
(OPTIONAL) Enter the keyword port then a number as the port to be used by the
TACACS+ server. The range is from zero (0) to 65535. The default is 49.
(OPTIONAL) Enter the keyword timeout then the number of seconds the switch waits
for a reply from the TACACS+ server. The range is from 0 to 1000. The default is 10
seconds.
(OPTIONAL) Enter the keyword key then a string up to 42 characters long as the
authentication key. This authentication key must match the key specified in the tacacs-
server key for the TACACS+ daemon.
Description
Introduced on the S6100-ON.
Introduced on the Z9100-ON.
Introduced on the S4048-ON.
Introduced on the S3048-ON.
Security 1419