Secure Dhcp Commands - Dell S6100 Configuration Manual

Version
9.0.2.0
8.3.19.0
8.3.11.1
8.3.12.0
8.3.7.0
7.6.1.0
7.5.1.0
pre-6.1.1.0
Usage Information Dell Networking OS supports both inbound and outbound SSH sessions using IPv4 or IPv6 addressing. Inbound
SSH supports accessing the system through the management interface as well as through a physical Layer 3
interface.
Example
Dell#ssh 10.16.151.48 -l anvltest
Trying 10.16.151.48...
01:18:16: %STKUNIT0-M:CP %SEC-5-SSH_USAGE: Initiated SSH Client v2 (FIPS
Disabled) to anvltest@10.16.151.48 by default from console
anvltest@10.16.151.48's password:
Last login: Thu Jan
[anvltest@dt-maa-linux-1 ~]# exit
logout
Dell#

Secure DHCP Commands

DHCP as defined by RFC 2131 provides no authentication or security mechanisms. Secure DHCP is a suite of features that protects
networks that use dynamic address allocation from spoofing and attacks.
clear ip dhcp snooping
Clear the DHCP binding table.
Syntax clear ip dhcp snooping binding
Defaults none
Command Modes EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version
9.10(0.0)
9.8(1.0)
9.8(0.0P5)
9.8(0.0P2)
1460 Security
Description
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the Z9000.
Added support for the -c and -m parameters on the S4810.
Introduced on the S4810.
Introduced on the S-Series.
Added IPv6 support. Introduced on the C-Series.
Introduced on the E-Series.
5 00:17:47 2012 from login-maa-101
Description
Introduced on the S6100-ON.
Introduced on the Z9100-ON.
Introduced on the S4048-ON.
Introduced on the S3048-ON.