exec-timeout
Set a time interval that the system waits for input on a line before disconnecting the session.
Syntax
exec-timeout minutes [seconds]
To return to default settings, use the no exec-timeout command.
Parameters
minutes
seconds
Defaults
10 minutes for console line; 30 minutes for VTY lines; 0 seconds
Command
LINE
Modes
Command
Version 8.3.16.1
History
Usage
To remove the time interval, use the exec-timeout 0 0 command.
Information
Example
Dell con0 is now available
Press RETURN to get started.
Dell>
exit
Return to the lower command mode.
Syntax
exit
Command
•
Modes
•
•
•
•
•
•
•
•
•
•
88
Enter the number of minutes of inactivity on the system
before disconnecting the current session. The range is from
0 to 35791. The default is 10 minutes for the console line
and 30 minutes for the VTY line.
(OPTIONAL) Enter the number of seconds. The range is from
0 to 2147483. The default is 0 seconds.
Introduced on the MXL 10/40GbE Switch IO Module.
EXEC Privilege
CONFIGURATION
LINE
INTERFACE
PROTOCOL GVRP
SPANNING TREE
MULTIPLE SPANNING TREE
MAC ACCESS LIST
ACCESS-LIST
PREFIX-LIST
ROUTER OSPF
Control and Monitoring