Exec-Banner; Exec-Timeout - Dell S6000 Reference Manual

exec-banner

Enable the display of a text string when the user enters EXEC mode.
S6000
Syntax
exec-banner
To disable the banner on terminal lines, use the no exec-banner command.
Defaults Enabled on all lines (if configured, the banner appears).
Command LINE
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0
Version
8.3.19.0
Version 8.3.7.0
Version 8.3.11.1
Version 8.1.1.0
Version 7.6.1.0
Version 7.5.1.0
E-Series
Usage Optionally, use the banner exec command to create a text string that is displayed
Information
when you access EXEC mode. This command toggles that display.
Related
line
Commands

exec-timeout

Set a time interval that the system waits for input on a line before disconnecting the session.
S6000
Syntax
exec-timeout minutes [seconds]
To return to default settings, use the no exec-timeout command.
Control and Monitoring
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the S4810.
Introduced on the Z9000.
Introduced on the E-Series ExaScale.
Introduced on the S-Series.
Introduced on the C-Series.
Original command.
— enables and configures console and virtual terminal lines to the system.
89