Show Lacp - Dell S6000 Reference Manual

Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0
Version
8.3.19.0
Version 8.3.11.1
Version 8.3.7.0
Version 6.2.1.1
Related

show lacp

Commands
show interfaces port-channel
groups.
show lacp
Display the LACP matrix.
S6000
Syntax
show lacp port-channel-number [sys-id | counters]
Parameters
port-channel-
number
sys-id
counters
Defaults Without a Port Channel specified, the command clears all Port Channel counters.
Command
•
Modes
•
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Link Aggregation Control Protocol (LACP)
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the E-Series.
— displays the LACP information.
Enter a port-channel number. The range is from 1 to 128.
(OPTIONAL) Enter the keywords sys-id and the value that
identifies a system.
(OPTIONAL) Enter the keyword counters to display the
LACP counters.
EXEC
EXEC Privilege
— displays information on configured Port Channel
861