Show Lacp - Dell Catalyst 3130 Command Reference Manual

Blade switch
Table of Contents

Advertisement

show lacp

show lacp
Use the show lacp user EXEC command to display Link Aggregation Control Protocol (LACP)
channel-group information.
Syntax Description
channel-group-number
counters
internal
neighbor
sys-id
| begin
| exclude
| include
expression
Command Modes
User EXEC
Command History
Release
12.2(40)EX1
Usage Guidelines
You can enter any show lacp command to display the active channel-group information. To display
specific channel information, enter the show lacp command with a channel-group number.
If you do not specify a channel group, information for all channel groups appears.
You can enter the channel-group-number option to specify a channel group for all keywords except
sys-id.
Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output
do not appear, but the lines that contain Output appear.
Examples
This is an example of output from the show lacp counters user EXEC command.
Switch> show lacp counters
Port
---------------------------------------------------------------------
Channel group:1
Gi2/0/1
Gi2/0/2
Cisco Catalyst Blade Switch 3120 for HP Command Reference
2-576
show lacp [channel-group-number] {counters | internal | neighbor | sys-id} [ | {begin | exclude |
include} expression]
(Optional) Number of the channel group. The range is 1 to 64.
Display traffic information.
Display internal information.
Display neighbor information.
Display the system identifier that is being used by LACP. The system
identifier is made up of the LACP system priority and the switch MAC
address.
(Optional) Display begins with the line that matches the expression.
(Optional) Display excludes lines that match the expression.
(Optional) Display includes lines that match the specified expression.
Expression in the output to use as a reference point.
Modification
This command was introduced.
LACPDUs
Sent
Recv
19
10
14
6
Chapter 2 Cisco Catalyst Blade Switch 3120 for HP Cisco IOS Commands
Marker
Marker Response
Sent
Recv
Sent
0
0
0
0
0
0
LACPDUs
Recv
Pkts Err
0
0
0
0
OL-12248-03

Advertisement

Table of Contents
loading

This manual is also suitable for:

Catalyst 3032

Table of Contents