Show Monitor Session - Dell Force10 Z9000 Reference Manual

Command History
Version 8.3.11.1
Version 8.1.1.0
Version 7.7.1.0
Version 7.5.1.0
Version 7.4.1.0
Example
FTOS(conf-mon-sess-11)#show config
!
monitor session 11
10/47 direction rx
FTOS#

show monitor session

Display the monitor information of a particular session or all sessions.
C-Series, E-Series, S-Series, Z-Series
Syntax show monitor session {session-ID}
To display monitoring information for all sessions, use the show monitor session
command.
Parameters
session-ID
Defaults none
Command Modes
Command History
Version 8.3.11.1
Version 8.1.1.0
Version 7.7.1.0
Version 7.5.1.0
Version 7.4.1.0
Example
FTOS#show monitor session 11
SessionID
---------
11
1152
Introduced on the Z9000.
Introduced on the E-Series ExaScale.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
source GigabitEthernet 10/0 destination GigabitEthernet
(OPTIONAL) Enter a session identification number. The range 0 to
65535.
• EXEC
• EXEC Privilege
Introduced on the Z9000.
Introduced on the E-Series ExaScale.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
Source
------
Gi 10/0
Destination Direction Mode
------------- --------- -------
Gi 10/47 rx interface