Redistribute Bgp - Dell S6000 Reference Manual

redistribute bgp

Redistribute routing information from a BGP process.
S6000
Syntax
redistribute bgp AS number [level-1| level-1-2 | level-2]
[metric metric-value] [metric-type {external| internal}]
[route-map map-name]
To return to the default values, use the no redistribute bgp command with
the appropriate parameters.
Parameters
AS number
level-1
level-1-2
level-2
metric metric-
value
metric-type
{external|
internal}
route-map
map-name
Defaults IS-IS Level 2 routes only
Command
•
Modes
•
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
838
Enter a number that corresponds to the autonomous system
number. The range is from 1 to 65355.
(OPTIONAL) Routes are independently redistributed into IS-
IS Level 1 routes only.
(OPTIONAL) Routes are independently redistributed into IS-
IS Level 1 and Level 2 routes.
(OPTIONAL) Routes are independently redistributed into IS-
IS as Level 2 routes only. This setting is the default.
(OPTIONAL) The value used for the redistributed route. Use a
metric value that is consistent with the destination protocol.
The range is from 0 to 16777215. The default is 0.
(OPTIONAL) The external link type associated with the
default route advertised into a routing domain. The two
options are:
•
external
•
internal
map-name is an identifier for a configured route map. The
route map filters imported routes from the source routing
protocol to the current routing protocol.
If you do not specify a map-name, all routes are
redistributed. If you specify a keyword, but fail to list route
map tags, no routes are imported.
ROUTER ISIS (for IPv4)
CONFIGURATION-ROUTER-ISIS-ADDRESS-FAMILY-IPV6 (for IPv6)
Intermediate System to Intermediate System (IS-IS)