Negotiation Auto - Dell S6000 Reference Manual

Command line for the system
Hide thumbs Also See for S6000:
Table of Contents

Advertisement

The following shows the difference between Link MTU and IP MTU.
Layer 2 Overhead
Ethernet
(untagged)
VLAN Tag
Untagged Packet
with VLAN-Stack
Header
Tagged Packet
with VLAN-Stack
Header

negotiation auto

Enable auto-negotiation on an interface.
S6000
Syntax
negotiation auto
To disable auto-negotiation, use the no negotiation auto command.
Defaults
Enabled.
Command
INTERFACE
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0
Version
8.3.19.0
Version 8.3.11.0
Version 8.3.7.0
Version 8.1.1.0
Version 7.6.1.0
Version 7.5.1.0
pre-Version
6.2.1.0
Interfaces
MTU cannot be higher than 1518 bytes and its IP MTU cannot be higher than
1500 bytes.
Link MTU and IP MTU Delta
18 bytes
22 bytes
22 bytes
26 bytes
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the E-Series ExaScale.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
657

Advertisement

Table of Contents
loading

Table of Contents