Show Running-Config Dcb-Buffer-Threshold - Dell Z9500 Reference Manual

7
Dell#
To determine the specific priority group, unicast or multicast queue that is
congested and monitor that queue separately:
Dell#show hardware linecard 0 buffer-stats-snapshot unit 0
resource port 1 prio 6
linecard: 0 unit: 0 port: 1 (interface Fo 0/0)
---------------------------------------
PG#
---------------------------------------
6

show running-config dcb-buffer-threshold

Displays the DCB buffer threshold details in the running configuration.
Syntax
show running—config buffer-threshold
Command
EXEC
Modes
EXEC Privilege
Command
Version
History
9.7(0.0)
Usage The following table describes the output fields displayed for the show running-
Information config dcb-buffer-threshold command:
Field
Profile name
Priority
buffer-size
pause-threshold-value
resume-threshold-value
Example
Dell#show run buffer-threshold
!
dcb-buffer-threshold test1
pfc priority 0 buffer-size 40
pfc priority 3 buffer-size 50
!
dcb-buffer-threshold test2
Data Center Bridging (DCB)
0 0
SHARED CELLS HEADROOM CELLS
0 0
Description
Introduced on the Z9500.
Description
Name of the DCB buffer threshold
profile
The priority of the queue for which the
buffer space settings apply
Ingress buffer size
Buffer limit at which the port sends the
pause to peer in KB.
Buffer offset limit at which the port
resumes the peer in KB.
619