Clear Bfd Counters - Dell Force10 Z9000 Reference Manual

Usage Protocol Liveness is a feature that notifies the BFD Manager when a client protocol (for
Information example, OSPF and ISIS) is disabled. When a client is disabled, all BFD sessions for that
protocol are torn down. Neighbors on the remote system receive an Admin Down control
packet and are placed in the Down state. Peer routers might take corrective action by
choosing alternative paths for the routes that originally pointed to this router.

clear bfd counters

Clear all BFD counters, or counters for a particular interface.
C-Series, E-Series
Syntax clear bfd counters [interface]
Parameters
interface
Defaults none
Command Modes EXEC Privilege
Command History
Version 8.2.1.0
Version 7.7.1.0
Version 7.5.1.0
Version 7.4.1.0
Related clear bfd counters
Commands
318
(OPTIONAL) Enter one of the following keywords and slot/port or
number information:
• For a 1-Gigabit Ethernet interface, enter the keyword
gigabitethernet and then enter the slot/port
information.
• For a 10-Gigabit Ethernet interface, enter the keyword
tengigabitethernet and then enter the slot/port
information.
• For a SONET interface, enter the keyword sonet and then
enter the slot/port information.
• For a port-channel interface, enter the keyword port-
channel and then enter a number. For the C-Series, the
range is 1 to 128. For the E-Series, the range is 1 to 255 for
TeraScale and 1 to 512 for ExaScale.
• For VLAN interfaces, enter the keyword vlan and then enter
a number from 1 to 4094. For ExaScale VLAN interfaces, the
range is 1 to 2730 (VLAN IDs can be 0 to 4093).
Introduced on the E-Series ExaScale.
Introduced on the C-Series.
Added support for VLAN and port-channel interfaces on the E-Series.
Introduced on the E-Series.
– displays the BFD counter information.