Maximum-Paths; Neighbor Activate - Dell Force10 Z9000 Reference Manual

maximum-paths

Configure the maximum number of parallel routes (multipath support) BGP supports.
C-Series, E-Series, S4810
Syntax maximum-paths {ebgp | ibgp} number
To return to the default values, use the no maximum-paths command.
Parameters
ebgp
ibgp
number
Defaults 1
Command Modes ROUTER BGPV6-ADDRESS FAMILY
Command History
Version 8.4.2.1
Version 8.2.1.0
Version 7.4.1.0
Usage If you enable this command, use the capture bgp-pdu max-buffer-size command
Information to recompute the best path.

neighbor activate

This command allows the specified neighbor/peer group to be enabled for the current AFI/SAFI.
C-Series, E-Series
Syntax neighbor {ipv6-address | peer-group-name} activate
To disable, use the no neighbor {ipv6-address | peer-group-name}
activate command.
Parameters
ipv6-address
peer-group-name
activate
Defaults Disabled.
Enter the keyword ebgp to enable multipath support for External BGP
routes.
Enter the keyword ibgp to enable multipath support for Internal BGP
routes.
Enter a number as the maximum number of parallel paths. The range
is 1 to 16. The default is 1.
Introduced on the C-Series and S4810.
Introduced on the E-Series ExaScale.
Introduced on the E-Series TeraScale.
Enter the IPv6 address in the x:x:x:x::x format.
NOTE: The :: notation specifies successive hexadecimal fields of
zeros.
Identify a peer group by name.
Enter the keyword activate to enable the identified neighbor or
peer group in the new AFI/SAFI.
479