Table of Contents
Advertisement
clear ip arp inspection statistics
clear ip arp inspection statistics
Use the clear ip arp inspection statistics privileged EXEC command on the switch stack or on a
standalone switch to clear the dynamic Address Resolution Protocol (ARP) inspection statistics.
Syntax Description
vlan vlan-range
Defaults
No default is defined.
Command Modes
Privileged EXEC
Command History
Release
12.2(40)EX1
Examples
This example shows how to clear the statistics for VLAN 1:
Switch# clear ip arp inspection statistics vlan 1
You can verify that the statistics were deleted by entering the show ip arp inspection statistics vlan 1
privileged EXEC command.
Related Commands
Command
show inventory
Cisco Catalyst Blade Switch 3130 and 3032 for Dell Command Reference
2-76
clear ip arp inspection statistics [vlan vlan-range]
(Optional) Clear statistics for the specified VLAN or VLANs.
You can specify a single VLAN identified by VLAN ID number, a range of
VLANs separated by a hyphen, or a series of VLANs separated by a comma.
The range is 1 to 4094.
Modification
This command was introduced.
statistics
Chapter 2
Cisco Catalyst Blade Switch 3130 and 3032 for Dell Cisco IOS Commands
Description
Displays statistics for forwarded, dropped, MAC validation failure, and
IP validation failure packets for all VLANs or the specified VLAN.
OL-13271-03
Advertisement
Table of Contents
