Clear Ip Bgp Flap-Statistics - Dell Z9500 Command Reference Manual

Version
8.3.11.1
8.3.7.0
7.8.1.0
7.7.1.0
Usage After you enter this command, the software deletes the history routes and returns
Information the suppressed routes to the Active state.
The clear ip bgp dampening command does not clear the history paths.

clear ip bgp flap-statistics

Clear BGP flap statistics, which includes number of flaps and the time of the last flap.
Z9500
Syntax
clear ip bgp [vrf vrf-name] [ipv4 [multicast | unicast] | ipv6
unicast] [flap-statistics [ipv4-address mask | ipv6–address
mask] | filter-list as-path-name | regexp regular-expression]
Parameters
vrf vrf-name
ipv4 multicast
ipv4 unicast
ipv6 unicast
ipv4-address
mask
ipv6–address
mask
Border Gateway Protocol
Description
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the C-Series.
(OPTIONAL) Enter the keyword vrf and then the name of
the VRF to clear BGP flap statistics corresponding to that
VRF.
NOTE: You can use this attribute on a specific VRF to
remove history routes corresponding to that VRF. You
can also use this attribute to return the suppressed
routes corresponding to a specific VRF to an active state.
(OPTIONAL) Enter the keyword ipv4 followed by the
keyword multicast to clear information related only to
ipv4 multicast routes.
(OPTIONAL) Enter the keyword ipv4 followed by the
keyword unicast to clear information related only to ipv4
unicast routes.
(OPTIONAL) Enter the keyword ipv6 followed by the
keyword unicast to clear information related only to ipv6
unicast routes.
(OPTIONAL) Enter an IPv4 address in dotted decimal format
and the prefix mask in slash format (/x) to reset only that
prefix.
(OPTIONAL) Enter the IPv6 address followed by the network
mask to reset only that prefix.
391