Clear Ip Bgp Flap-Statistics - Dell S4810 Reference Manual

ip-address
mask
Command EXEC Privilege
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.4.
(0.0)
Version 9.0.2.0
Version
8.3.19.0
Version 8.3.11.1
Version 8.3.7.0
Version 7.8.1.0
Version 7.7.1.0
Usage After you enter this command, the software deletes the history routes and returns
Information the suppressed routes to the Active state.
The clear ip bgp dampening command does not clear the history paths.

clear ip bgp flap-statistics

Clear BGP flap statistics, which includes number of flaps and the time of the last flap.
S4810
Syntax
clear ip bgp [vrf vrf-name] flap-statistics [ip-address mask |
filter-list as-path-name | regexp regular-expression]
Parameters
vrf vrf-name
400
NOTE: You can use this attribute on a specific VRF to
remove history routes corresponding to that VRF. You
can also use this attribute to return the suppressed
routes corresponding to a specific VRF to an active state.
(OPTIONAL) Enter an IP address in dotted decimal format
and the prefix mask in slash format (/x) to clear dampening
information only that BGP neighbor.
Added support for VRF.
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the C-Series.
(OPTIONAL) Enter the keyword vrf and then the name of
the VRF to clear BGP flap statistics corresponding to that
VRF.
Border Gateway Protocol