Clear Counters Ip Access-Group; Ip Access-Group - Dell Force10 S4810P Reference Manual

Version 8.1.1.0
Version 7.8.1.0
Version 7.6.1.0
Version 7.5.1.0
pre-Version
6.2.1.1

clear counters ip access-group

Erase all counters maintained for access lists.
C-Series, E-Series, S-Series, Z-Series
Syntax clear counters ip access-group [access-list-name]
Parameters
access-list-name
Command Modes EXEC Privilege
Command History
Version 8.3.11.1
Version 8.1.1.0
Version 7.8.1.0
Version 7.6.1.0
Version 7.5.1.0
pre-Version
6.2.1.1

ip access-group

Assign an IP access list (IP ACL) to an interface.
C-Series, E-Series, S-Series, Z-Series
Syntax ip access-group access-list-name {in | out} [implicit-permit]
[vlan vlan-id]
To delete an IP access-group configuration, use the no ip access-group access-
list-name {in | out} [implicit-permit] [vlan vlan-id] command.
Parameters
access-list-name
in
236
Introduced on the E-Series ExaScale.
Increase the name string to accept up to 140 characters. Prior to
7.8.1.0, names were up to 16 characters long.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
(OPTIONAL) Enter the name of a configured access-list, up to 140
characters.
Introduced on the Z9000.
Introduced on the E-Series ExaScale.
Increase the name string to accept up to 140 characters. Prior to
7.8.1.0, names were up to 16 characters long.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
Enter the name of a configured access list, up to 140 characters.
Enter the keyword in to apply the ACL to incoming traffic.