Dot1X Max-Supplicants - Dell MXL 10GbE Reference Manual

Defaults 2
Command INTERFACE
Modes
Command
Version 9.2(0.0)
History

dot1x max-supplicants

Restrict the number of supplicants that can be authenticated and permitted to access the network
through the port. This configuration is only takes effect in Multi-Auth mode.
Syntax
dot1x max-supplicants number
Parameters
number
Defaults 128 hosts can be authenticated on a single authenticator port.
Command INTERFACE
Modes
Command
Version 9.2(0.0)
History
Related dot1x host-mode
Commands
dot1x port-control
Enable port control on an interface.
Syntax
dot1x port-control {force-authorized | auto | force-
unauthorized}
Parameters
force-
authorized
auto
force-
unauthorized
Defaults none
802.1X
Introduced on the MXL 10/40GbE Switch IO Module.
Enter the number of supplicants that can be authenticated
on a single port in Multi-Auth mode. The range is from 1 to
128. The default is 128.
Introduced on the MXL 10/40GbE Switch IO Module.
— Enables single-host or multi-host authentication.
Enter the keywords force-authorized to forcibly
authorize a port.
Enter the keyword auto to authorize a port based on the
802.1X operation result.
Enter the keywords force-unauthorized to forcibly
deauthorize a port.
131