Dot1X Max-Supplicants; Dot1X Port-Control - Dell S4810 Reference Manual

dot1x max-supplicants

Restrict the number of supplicants that can be authenticated and permitted to access the network
through the port. This configuration is only takes effect in Multi-auth mode.
S4810
Syntax
dot1x max-supplicants number
Parameters
number
Defaults 128 hosts can be authenticated on a single authenticator port.
Command INTERFACE
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0
Version 9.0.0.0
Version
8.3.19.0
Version
8.3.12.0
Version 8.3.11.1
Version 8.4.1.0
Related dot1x host-mode
Commands

dot1x port-control

Enable port control on an interface.
S4810
Syntax
dot1x port-control {force-authorized | auto | force-
unauthorized}
802.1X
Enter the number of supplicants that can be authenticated
on a single port in Multi-auth mode. The range is from 1 to
128. The default is 128.
Introduced on the S6000.
Introduced on the Z9000.
Introduced on the S4820T.
Introduced on the S4810.
Introduced on the Z9000.
Introduced on the C-Series and S-Series.
— Enable single-host or multi-host authentication
193