Dot1X Max-Supplicants - Dell Z9500 Reference Manual

Defaults 2
Command INTERFACE
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.2(1.0)
8.3.19.0
8.3.12.0
8.3.11.1
7.6.1.0
7.4.1.0

dot1x max-supplicants

Restrict the number of supplicants that can be authenticated and permitted to access the network
through the port. This configuration is only takes effect in Multi-Auth mode.
Z9500
Syntax
dot1x max-supplicants number
Parameters
number
Defaults 128 hosts can be authenticated on a single authenticator port.
Command INTERFACE
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.2(1.0)
8.3.19.0
802.1X
Description
Introduced on the Z9500.
Introduced on the S4820T.
Introduced on the S4810.
Introduced on the Z9000.
Introduced on the C-Series and S-Series.
Introduced on the E-Series.
Enter the number of supplicants that can be authenticated
on a single port in Multi-Auth mode. The range is from 1 to
128. The default is 128.
Description
Introduced on the Z9500.
Introduced on the S4820T.
191