Lan Settings - Keysight N9912A User Manual

 Press the ▲|▼ arrows to highlight the row to be edited.
 Then press Edit.
 Use the ▲|▼ arrows or rotary knob to select the field to be edited.
 Use the ▲|▼ arrows or numeric keypad to edit that field.
 Press
 Press

LAN Settings

Configure the LAN settings to be used to communicate with the Data Link Software.
Learn more at:
LAN Settings
How to configure the LAN settings
The first three 'Current...' settings can NOT be edited.
 Press System 7.
 Then
 Then LAN.
 Use the ▲|▼ arrows to select one of the following, then press Edit.
182
or
Cancel Done
to exit the Date and Time settings. The readout in the upper-right
Done
corner of the FieldFox screen will update accordingly.
www.keysight.com/find/fieldfoxsupport
System Configuration.
Hostname Change the name that can be used to address the FieldFox if your
o
server supports this feature. The default hostname is generated automatically.
Obtain IP Choose from:
o
DHCP - IP Address is assigned dynamically. If your server supports this
o
feature, the IP Address for the FieldFox is assigned each time it is started.
Static - Set the IP Address manually. The Address remains until you change it.
o
Static IP Address - Enter the IP Address – including periods - in the format
o
nnn.nnn.nnn.nnn
Static Subnet Mask - Enter the Subnet Mask – including periods - in the format
o
nnn.nnn.nnn.nnn
Static Gateway - Enter the Static Gateway – including periods - in the format
o
nnn.nnn.nnn.nnn
Apply Settings Choose from:
o
Power Up The above settings take effect when the FieldFox is started.
o
when the edits are complete.
FieldFox User's Guide