Lan Interface - Keysight N9912A Service Manual

Theory of Operation

LAN Interface

LAN Interface
See the "System Configuration" section of the FieldFox User's Guide for details
on reviewing and configuring LAN settings.
Currently the LAN interface supports only communication for the Data Link
software and sending SCPI commands for service purposes.
The LAN interface supports Auto MDIX. When a LAN cable is connected to the
FieldFox, if the other end of the cable supports Auto MDIX, there is no need for
a cross-over cable.
There are two LEDs on the LAN connector. When there is successful
communication over a LAN cable, both LEDs are active. If both LEDs are not
active, consider using a cross-over cable.
Keysight N9912A Service Guide 5-31