Avaya S8700 Maintenance Manual page 206

For multi-connect configurations

Hide thumbs Also See for S8700:

Table of Contents

Additional Maintenance Procedures

To place the call:

1. Dial the FAC described above and listen for dial tone.

2. Dial the port network number followed by **** and listen for one of the

following tones:

Reorder tone

Confirmation tone

3. Repeated test calls will alternate between out-of-service time slots on TDM

bus A and TDM bus B.

System Tone Test Call

This test connects the voice terminal to a specific system tone.

To place the call:

1. Dial the FAC described above.

2. Dial the port network number followed by * and the two-digit tone

identification number from the following table.

3. Listen for one of the following tones:

Intercept tone

Reorder tone

Table 5-3. System Tone Identification Numbers

Issue 1 May 2002

There are no out-of-service time slots on the

specified port network.

Connection is made to an out-of-service time slot.

The number entered is not a valid tone number.

Inter-PN resources are not available.

The specified tone will be heard if it is functioning.

For a definition of call progress tones see Overview for Avaya

MultiVantage™ Software.

Reorder tone

Recall dial tone

Continued on next page

Troubleshooting