Renault Laguna III Manual page 2504

Distribution unit: Removal - Refitting
a Unclip the electrical wiring at (6) .
a Remove the bolt (7) from the max fuse box.
a Move the max fuse box in the direction of the arrow.
a Fit the tool (8) (Ms. 583) on the coolant pipes.
a Disconnect the heater matrix pipes.
a Remove:
- the expansion valve - compressor connecting pipe
bracket bolt on the expansion valve,
HEATING
- the expansion valve - condenser connecting pipe
bracket bolt on the expansion valve.
a Disconnect:
- the expansion valve - compressor connecting pipe
on the expansion valve,
- the expansion valve - condenser connecting pipe
on the expansion valve,
WARNING
In order to avoid any refrigerant leaks, do not
damage (deform, twist, etc.) the pipe.
a Remove:
- the expansion valve - compressor connecting pipe
on the expansion valve,
- the expansion valve - condenser connecting pipe
on the expansion valve,
a Insert the blanking plugs.
135420
a Unclip the heat shield.
WARNING
To prevent the surrounding components from
overheating, do not damage (tear, pierce, bend,
etc.) a heat shield.
Any damaged heat shields must be replaced.
a Remove the heat shield.
a Remove:
- the dashboard (see Dashboard: Removal - Refit-
ting) (57A, Interior equipment),
- the dashboard cross member (see Dashboard
cross member: Removal - Refitting) (42A, Upper
front structure).
135419
61A-7
61A