Renault Laguna III Manual page 2486

ANTI-LOCK BRAKING SYSTEM
Hydraulic brake unit: Removal - Refitting
V4Y or V9X
a Remove the brake pipe unions (3) on the hydraulic
brake unit.
a Unclip the wiring from the hydraulic brake unit con-
nector.
a Remove:
- the hydraulic unit bolts (4) on its support,
- the hydraulic unit.
REFITTING
I - REFITTING OPERATION FOR PART
CONCERNED
a Refit:
- the hydraulic brake unit,
- the brake pipe unions on the hydraulic brake unit,
- the air conditioning pipes between the expansion
valve and the condenser (see Condenser - expan-
sion valve connecting pipe: Removal - Refit-
ting) (62A, Air conditioning).
a Tighten to torque:
- the hydraulic brake unit bolts on the support (8
N.m),
- the brake pipe unions on the hydraulic brake
unit (13 N.m).
a Connect the hydraulic brake unit computer connec-
tor.
a Clip on the wiring of the hydraulic brake unit connec-
tor.
II - FINAL OPERATION
a Refit:
- the bulkhead heat-resistant soundproofing,
- the engine - gearbox assembly (see Engine -
gearbox assembly: Removal - Refitting) (10A,
Engine and peripherals),
- the engine undertray.
a Remove the pedal press from the brake pedal.
a Connect the battery (see Battery: Removal - Refit-
ting) (80A, Battery).
a Bleed the braking circuit (see 30A, General infor-
mation, Braking circuit: Bleed, page 30A-4) .
123486
38C-14
38C