Dell S4810 Reference Manual page 1659

Field
(none)
remote
ref clock
st
when
poll
reach
delay
offset
disp
Example
Dell#show ntp associations
remote
=============================================================
10.10.120.5 0.0.0.0
*172.16.1.33 127.127.1.0 11 6 16
104.16
172.31.1.33 0.0.0.0
192.200.0.2 0.0.0.0
* master (synced), # master (unsynced), + selected, - candidate
Dell#
Related show ntp status
Commands
System Time and Date
Description
One or more of the following symbols could be displayed:
• * means synchronized to this peer.
• # means almost synchronized to this peer.
• + means the peer was selected for possible
synchronization.
• - means the peer is a candidate for selection.
• ~ means the peer is statically configured.
Displays the remote IP address of the NTP peer.
Displays the IP address of the remote peer's reference clock.
Displays the peer's stratum, that is, the number of hops
away from the external time source. A 16 in this column
means the NTP peer cannot reach the time source.
Displays the last time the switch received an NTP packet.
Displays the polling interval (in seconds).
Displays the reachability to the peer (in octal bitstream).
Displays the time interval or delay for a packet to complete
a round-trip to the NTP time source (in milliseconds).
Displays the relative time of the NTP peer's clock to the
switch clock (in milliseconds).
Displays the dispersion.
ref clock st when poll reach delay
16 - 256
16 - 256
16 - 256
— displays the current NTP status.
offset disp
0 0.00 0.000 16000.0
377 -0.08 -1499.9
0 0.00 0.000 16000.0
0 0.00 0.000 16000.0
1659