Show Ntp Status - Dell S4810 Reference Manual

Hide thumbs Also See for S4810:

Table of Contents

show ntp status

Display the current NTP status.

show ntp status

This guide is platform-specific. For command information about other platforms,

refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

Version 9.0.2.0

Version 8.3.11.1

Version 8.3.7.0

Version 7.6.1.0

Version 7.5.1.0

The following describes the show ntp status command shown in the Example

"Clock is..."

"frequency is..."

"reference time

"clock offset is..."

"root dispersion

"peer mode is..."

EXEC Privilege

Introduced on the S6000.

Introduced on the S4820T.

Introduced on the Z9000.

Introduced on the S4810.

Introduced on the S-Series.

Introduced on the C-Series.

Introduced on the E-Series.

States whether or not the switch clock is synchronized,

which NTP stratum the system is assigned and the IP

address of the NTP peer.

Displays the frequency (in ppm), stability (in ppm) and

precision (in Hertz) of the clock in this system.

Displays the reference time stamp.

Displays the system offset to the synchronized peer and the

time delay on the path to the NTP root clock.

Displays the root and path dispersion.

State what NTP mode the switch is. This should be Client

System Time and Date