Redistribute Isis - Dell Force10 Z9000 Reference Manual

Defaults Not configured.
Command Modes ROUTER BGP
Command History
Version 8.3.11.1
Version 8.3.7.0
Version 8.3.1.0
Version 7.8.1.0
Version 7.7.1.0
Usage
With FTOS version 8.3.1.0 and later, you can use the redistribute command to advertise
Information
the IGP cost as the MED on redistributed routes. When you set the route-map with metric-type
internal and applied outbound to an EBGP peer/peer-group, the advertised routes
corresponding to those peer/peer-group have the IGP cost set as MED.
If you do not configure the default-metric command, in addition to the redistribute
command, or there is no route map to set the metric, the metric for redistributed static and
connected is "0".
To redistribute the default route (0.0.0.0/0), configure the neighbor default-
originate command.
Related neighbor default-originate
Commands

redistribute isis

Redistribute IS-IS routes into BGP.
E-Series
Syntax redistribute isis [WORD][level-1| level-1-2 | level-2] [metric
metric-value] [route-map map-name]
To return to the default values, enter the no redistribute isis [WORD][level-1|
level-1-2 | level-2] [metric metric-value] [route-map map-name]
command.
Parameters
WORD
level-1
level-1-2
level-2
metric
value
Introduced on the Z9000.
Introduced on the S4810.
Introduced the ability to substitute IGP cost for MED when a peer/
peer-group outbound route-map is set as internal.
Introduced on the S-Series.
Introduced on the C-Series.
– injects the default route.
ISO routing area tag.
(OPTIONAL) Enter the keyword level-1 to independently
redistributed into Level 1 routes only.
(OPTIONAL) Enter the keyword level-1-2 to independently
redistributed into Level 1 and Level 2 routes. This is the default.
(OPTIONAL) Enter the keyword level-2 to independently
redistributed into Level 2 routes only.
metric-
(OPTIONAL) Enter the keyword metric followed by the metric value
used for the redistributed route. Use a metric value that is consistent
383