Dell S4810 Reference Manual page 1649

end-month
end-time
offset
Defaults Not configured.
Command CONFIGURATION
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0
Version
8.3.19.0
Version 8.3.11.1
Version 8.3.7.0
Version 7.6.1.0
Version 7.5.1.0
Version 7.4.1.0
pre-Version
6.1.1.0
Related
calendar set
Commands
clock summer-time date
switch to daylight saving time on a one-time basis.
show clock
System Time and Date
Enter the name of one of the 12 months in English.
Enter the time in hours:minutes:seconds. For the hour
variable, use the 24-hour format; example, 17:15:00 is 5:15
pm.
(OPTIONAL) Enter the number of minutes to add during the
summer-time period. The range is from 1 to 1440. The
default is 60 minutes.
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the C-Series.
Updated the start-day and end-day options to allow for
using the three-letter abbreviation of the weekday name.
Introduced on the E-Series.
— sets the hardware clock.
— sets a date (and time zone) on which to convert the
— displays the current clock settings.
1649